Do It Yourself Tips - Be Handy

Caulk Repair and Replacement Around Sink, Bathtub, Toilet and Shower

admin — Wed, 20 Aug 2008 21:38:39 +0000

Clean up the caulking around your sink with this video tutorial. Remove all of the old and rotten caulking around your sink with a sharp point, such as a credit card. Then run a nice little bead of Precision Shot caulk to bring your sink to life!

Caster and Wheel Lubrication Repair - Video

admin — Tue, 19 Aug 2008 23:50:54 +0000

This video shows you quick, easy, and clean steps to repair sticky casters and wheels from Precision Shot allows you to Oil, Grease, and Lubricate thousands of things around the house! Precision Shot is The Precise Way To Put It Where You Need It!

How to Fix a Broken Shoe with Polyurethane Glue - Video

admin — Tue, 19 Aug 2008 23:47:06 +0000

Fix a broken shoe or sandal with Precision Shot Polyurethane Glue

How To Fix a Squeeky or Stuck Door Hinge - Video

admin — Tue, 22 Jul 2008 19:46:06 +0000

Home Repairs with Precision Shot Latex Caulking

admin — Tue, 22 Jul 2008 19:43:23 +0000

The Precision Shot Latex White Caulk #SCW allows you to have a very handy tool to make quick, easy, and clean caulking/sealing repairs around your house. Storing the Precision Shot #SCW in a kitchen drawer gives you quick access to make the repairs. Simply place the tip (Blue Plastic Tip or Pink Metal Tip works best) onto the Precision Shot container after removing the cap. Our dispenser maximizes precision placement while minimizing the waste and cleanup. Best of all, you get the repair finished quick and easily. The latex caulk will cleanup with water before it cures. Full cure time is 24 hrs. The many areas of use include the kitchen sink, bathroom sinks, shower, bathtub and toilets. Once the repair is finished, place the tip cap on the metal tips or replace the all plastic taper tip with the original syringe cap and store the Precision Shot back into the “junk drawer” for future use.

Precision Shot for Guns and Firearms

admin — Wed, 04 Jun 2008 22:24:33 +0000

Guns are a great application for several Precision Shot products. Depending upon the gun owner, you may choose to use a grease #GLML, light oil #OUO, or an anti-seize compound #GLAS. Whatever you choose to use, our tips and dispenser allow you to use a very minimal material while placing it into the exact location needed. Many other products, especially aerosols, apply material very haphazardly and thus can be very messy!

Lubricating Sunroof tracks

admin — Wed, 04 Jun 2008 22:21:08 +0000

With the rising number of automobiles having sun/moonroofs, there is a need to keep their tracks and guides lubricated. These are typically very difficult to reach as the are very compact and have multiple levels of surfaces that need to be coated with grease. Precision Shot offers two greases to remedy this issue. We recommend using either our gray Moly/Lithium Grease (#GLML) or our white Lithium Grease (#GLL). Simply place a Pink, Yellow, or Blue Plastic Tip onto the Precision Shot dispenser and get the grease into those tough to reach places. Quick, Clean, and Precise!

Rim and Wheel Hubs

admin — Thu, 06 Mar 2008 17:16:22 +0000

Stuck hubs is a very common issue and cause great stress, especially if you are trying to remove a flat tire in a remote area, or on a dangerous highway. Hard to remove rim and wheel hubs are usually caused by the dissimilar metals between the aluminum rims (in many cases) and the steel hub. Simply place a small coating of the Precision Shot Anti-Seize #GLAS onto the mating surfaces of the wheel/rim and the car hub. Over time the Anti-Seize will keep these dissimilar metals from bonding/sticking to each other and thus make the removal much easier while changing that flat tire in the snow storm.

Maintaining Automotive Brakes

admin — Wed, 27 Feb 2008 02:51:46 +0000

Disc brake systems on automobiles have many metal to metal contacts which need to remain free moving through all of the very high-to-low heat cycles. Obviously, we are NOT talking about putting ANYTHING onto the contact surfaces between the brake pads and the rotors! Rather putting anti-seize compounds onto the metal to metal contacts where the pad retainers float and make contact on the caliper. There are several general styles of disc brake systems and there are differences in each automotive brand as well. The Precision Shot, #GLAS Anti-Seize compound is a great material for these applications.

Warning Repeat: Do not put anything on the rotor surface that touches the brake pads!

Fixing Door Hinge Squeaks

admin — Tue, 19 Feb 2008 17:44:10 +0000

Door hinge squeaks are by far, this is one of the most annoying and common problems around the house. Precision Shot makes this repair very simple, quick, and clean! We have two products to remedy this issue. Both our Ultimate Oil (#OUO) and our Synthetic Oil (#OS) can be used. Simply place the Precision Shot Black Tip onto the oil dispenser. The Black Tip will usually fit into the small gap of the hinge points. You want to put the oil into the highest point as possible on the hinge joint so that the oil will lubricate as much of the joint as possible by flowing down. You may also knock the hinge pin up a bit, as if you were going to remove the door from the hinges, to allow you to place the oil into the very top area of the joint.