Stuck hubs is a very common issue and cause great stress, especially if you are trying to remove a flat tire in a remote area, or on a dangerous highway. Hard to remove rim and wheel hubs are usually caused by the dissimilar metals between the aluminum rims (in many cases) and the steel hub. Simply place a small coating of the Precision Shot Anti-Seize #GLAS onto the mating surfaces of the wheel/rim and the car hub. Over time the Anti-Seize will keep these dissimilar metals from bonding/sticking to each other and thus make the removal much easier while changing that flat tire in the snow storm.

Tags: flat tire, rim hubs, wheel hubs

This entry was posted on Thursday, March 6th, 2008 at 5:16 pm and is filed under automotive repairs. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.