Disc brake systems on automobiles have many metal to metal contacts which need to remain free moving through all of the very high-to-low heat cycles. Obviously, we are NOT talking about putting ANYTHING onto the contact surfaces between the brake pads and the rotors! Rather putting anti-seize compounds onto the metal to metal contacts where the pad retainers float and make contact on the caliper. There are several general styles of disc brake systems and there are differences in each automotive brand as well. The Precision Shot, #GLAS Anti-Seize compound is a great material for these applications.

Warning Repeat: Do not put anything on the rotor surface that touches the brake pads!

Door hinge squeaks are by far, this is one of the most annoying and common problems around the house. Precision Shot makes this repair very simple, quick, and clean! We have two products to remedy this issue. Both our Ultimate Oil (#OUO) and our Synthetic Oil (#OS) can be used. Simply place the Precision Shot Black Tip onto the oil dispenser. The Black Tip will usually fit into the small gap of the hinge points. You want to put the oil into the highest point as possible on the hinge joint so that the oil will lubricate as much of the joint as possible by flowing down. You may also knock the hinge pin up a bit, as if you were going to remove the door from the hinges, to allow you to place the oil into the very top area of the joint.