This video shows you quick, easy, and clean steps to repair sticky casters and wheels from Precision Shot allows you to Oil, Grease, and Lubricate thousands of things around the house! Precision Shot is The Precise Way To Put It Where You Need It!

Fix a broken shoe or sandal with Precision Shot Polyurethane Glue

The Precision Shot Latex White Caulk #SCW allows you to have a very handy tool to make quick, easy, and clean caulking/sealing repairs around your house. Storing the Precision Shot #SCW in a kitchen drawer gives you quick access to make the repairs. Simply place the tip (Blue Plastic Tip or Pink Metal Tip works best) onto the Precision Shot container after removing the cap. Our dispenser maximizes precision placement while minimizing the waste and cleanup. Best of all, you get the repair finished quick and easily. The latex caulk will cleanup with water before it cures. Full cure time is 24 hrs. The many areas of use include the kitchen sink, bathroom sinks, shower, bathtub and toilets. Once the repair is finished, place the tip cap on the metal tips or replace the all plastic taper tip with the original syringe cap and store the Precision Shot back into the “junk drawer” for future use.

Guns are a great application for several Precision Shot products. Depending upon the gun owner, you may choose to use a grease #GLML, light oil #OUO, or an anti-seize compound #GLAS. Whatever you choose to use, our tips and dispenser allow you to use a very minimal material while placing it into the exact location needed. Many other products, especially aerosols, apply material very haphazardly and thus can be very messy!

With the rising number of automobiles having sun/moonroofs, there is a need to keep their tracks and guides lubricated. These are typically very difficult to reach as the are very compact and have multiple levels of surfaces that need to be coated with grease. Precision Shot offers two greases to remedy this issue. We recommend using either our gray Moly/Lithium Grease (#GLML) or our white Lithium Grease (#GLL). Simply place a Pink, Yellow, or Blue Plastic Tip onto the Precision Shot dispenser and get the grease into those tough to reach places. Quick, Clean, and Precise!

Stuck hubs is a very common issue and cause great stress, especially if you are trying to remove a flat tire in a remote area, or on a dangerous highway. Hard to remove rim and wheel hubs are usually caused by the dissimilar metals between the aluminum rims (in many cases) and the steel hub. Simply place a small coating of the Precision Shot Anti-Seize #GLAS onto the mating surfaces of the wheel/rim and the car hub. Over time the Anti-Seize will keep these dissimilar metals from bonding/sticking to each other and thus make the removal much easier while changing that flat tire in the snow storm.

Disc brake systems on automobiles have many metal to metal contacts which need to remain free moving through all of the very high-to-low heat cycles. Obviously, we are NOT talking about putting ANYTHING onto the contact surfaces between the brake pads and the rotors! Rather putting anti-seize compounds onto the metal to metal contacts where the pad retainers float and make contact on the caliper. There are several general styles of disc brake systems and there are differences in each automotive brand as well. The Precision Shot, #GLAS Anti-Seize compound is a great material for these applications.

Warning Repeat: Do not put anything on the rotor surface that touches the brake pads!

Door hinge squeaks are by far, this is one of the most annoying and common problems around the house. Precision Shot makes this repair very simple, quick, and clean! We have two products to remedy this issue. Both our Ultimate Oil (#OUO) and our Synthetic Oil (#OS) can be used. Simply place the Precision Shot Black Tip onto the oil dispenser. The Black Tip will usually fit into the small gap of the hinge points. You want to put the oil into the highest point as possible on the hinge joint so that the oil will lubricate as much of the joint as possible by flowing down. You may also knock the hinge pin up a bit, as if you were going to remove the door from the hinges, to allow you to place the oil into the very top area of the joint.

Silicone Sealant – Clear (Part #SRTV)

This clear silicone sealant is also great around the house, RV, or Campsite to touch up areas around doors, windows, sinks, showers, tubs, tent tears, and toilets. It does NOT clean up with water but it is more durable and permanent than latex caulking. Because of the nature of the product, Silicone Sealant has a shorter shelf life and gets a rubbery characteristic once cured in 24hrs. It is waterproof and has good adhesive characteristics once cured.

Silicone Sealant Specs

• Viscosity - VERY HIGH
• Pourable? NO
• Self Leveling? NO
• Recommended Tips: #1 All Plastic Taper (remember you can cut these tips to make the opening larger if required, #2 Pink, #3 Yellow, #4 Black
• Recommend Tip Caps? YES
• Buy Silicone Sealant Here
• Tip cleaning recommendations: The nature of this material prevents the needle tip from being reused. It tends to cure rapidly and is difficult to clean. It is highly recommended that you keep the tip attached to the container once used and slide the appropriate tip cap onto the end. More than likely the tip will not be usuable after any length of time but leaving it attached allows you to put a new tip onto the container and maximize the use of the remaining material in the Precision Shot container. Store at room temperature and low humidity to maximize shelf life.